| Customization: | Available |
|---|---|
| Application: | High-voltage, Low-voltage, High-temperature |
| Material: | Porcelain |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Professional Supplier Porcelain Disc Suspension Insulator
Introduction:
Disc suspension insulator is an assembly of one or more shells with metallic fittings. They are nonrigid supporting type. It can be divided into ball & socket type and clevis & tongue type. This structure enables them form the insulator string by fitting into themselves one another as per voltage requirement. A suspension insulator set complete with the fittings is used to carry a line conductor or conductors at its lower end. The top is fixed to the cross arm of the tower.
1.The head portion of ball pin and cap are suitably designed so that when the insulator is under tension the stress are uniformly distributed as compression over the pin hole portion of the shell
2. Disc insulator is designed, manufactured and tested in accordance with insulator standard / insulator specification
3. Disc insulator and insulator end fittings come in contact with cement
4. Usually made from porcelain material
5. Normally used on transmission power lines
Disc insulator can be designed in accordance with ANSI C29.2 and IEC 60305 standards, the code number of
Disc insulator .
6. ANSI C29.2 specification: ANSI 52-1, ANSI 52-2, ANSI 52-3, ANSI 52-4, ANSI 52-5, ANSI 52-6, ANSI 52-8, ANSI 52-9A
7. IEC 60305 specification: U40B, U40BP, U70BS, U70BL, U70BLP, U100BS, U100BL, U100BLP, U120B, U120BP, U160BSP, U160BS, U160BL, U160BLP, U210B, U210BP, U300B, U3000BP, U400B, U500B, U70C, U70CP, U100C, U100CP, U120C, U120CP, U160C, U160CP, U210C, U210CP
){kind=link}